Maintenance procedures for rolling machines

1, according to the rolling machine lubrication diagram provides, according to the requirements of the oil cup lubrication points for fuel

2, according to the provisions of the rolling machine to the parameters of the coil

3, connected to the power supply, the next roller and the positive and negative direction of the two movements and on the roller movements, check the movement of the card is not the normal phenomenon of death

4, in strict accordance with the coiling machine processing procedures and operating mode of operation, the upper roll down to the limit position, we must pay great attention to the safe operation of equipment.

5, when the main drive after the shutdown, the upper roller can only lift, reverse the dumping of the bearing reset and the tilt of the roll

6, in the course of operation, if irregular noise, shock and other abnormal phenomena, should immediately stop the inspection

7, the operation of the staff to coordinate with each other, obey the command of the person in charge of the coil, no password, prohibit start the machine

8, the coil operation should be paid great attention to hand or steel plate with the pressure to be involved.

9, when lifting the steel plate or reel, please be careful not to collide with the machine. After the end of the coil, so that the completion of material to make site clear, and do a good job of equipment maintenance