Polishing Machine The Requirements Of
Polishing Machine It is mainly to make up for the automobile surface after spraying, may appear coarse grains, sandpaper marks, flow marks, anti-white, orange peel and other paint film surface of the small defects, treatment method is after spraying after grinding polishing treatment to improve the mirror effect of paint film, to achieve bright, smooth, gorgeous requirements.
The polishing machine consists of base, parabolic, Polishing Machine polishing fabric, polishing cover and cover.
The motor is fixed on the base, and the taper sleeve used for fixing the disc is connected with the motor shaft by screws. The polished fabric is fastened on the parabolic disc through the ferrule, Polishing Machine and the motor can be used to polish the specimen by hand after the switch on the base is connected with the power.
The polishing fluid added to the polishing process can be placed in the side plate adjacent to the polishing machine by means of a drain in a plastic plate fixed on the base.
The polishing cover and the cover can prevent the dust and other sundries from falling on the polished fabric when the machine is not in use.
The key to polishing the machine is to try to get the maximum polishing rate so as to remove the damage layer from the polishing process as soon as possible. At the same time, the polished damage layer will not affect the final observed organization, that is, will not cause false organization. The former requires the use of coarse abrasive, to ensure a larger polishing rate to remove the damaged layer, Polishing Machine but the polishing damage layer is also deep; the latter requires the use of the finest material, so that the polished damage layer is shallow, but the polishing rate is low.
The best way to resolve this paradox is to divide the polishing into two stages. The purpose of coarse throw is to remove the damage layer, this stage should have the maximum polishing rate, Polishing Machine the surface damage caused by rough throw is the secondary consideration, but it should be as small as possible, followed by the fine throw (or final throw), the aim is to remove the surface damage caused by rough throw, so as to minimize the polishing damage.
Automatic polishing machine, automatic polishing surface, applicable to small and medium-sized workpiece, automatic polishing workpiece surface gloss and deburring. One person can operate multiple devices.
This kind of equipment is relatively simple operation, the operation personnel request is low, may raise the production efficiency, reduces the labor intensity, Polishing Machine saves the production cost, enhances the product quality, reduces the product quality difference.
The aim is to eliminate the rough polishing of the damaged layer, this stage should have the largest polishing rate of coarse polishing, surface damage is a secondary consideration of the formation, but also should be as small as possible;
The second is fine polishing, which is designed to eliminate the surface damage of coarse polishing and reduce the damage to the lower polishing.