Polishing Machine Use Effect

Polished cloth wheel in order to achieve the best results, Polishing Machine polishing machine required polishing cloth round in the material and size to be prepared with the requirements. Polishing machine motor power determines the size of the polishing wheel, the motor shaft must be matched with the diameter of the polishing wheel. Place the polishing wheel in the center of the shaft and tighten it with a wrench. Polishing wheel surface speed uniformity in order to obtain the best polishing effect, so if you use too much polishing wheel with a smaller motor, when the polishing speed will drop a lot of polishing effect will be affected.

1, non-suture-type cloth round: multi-purpose soft cotton fabric, Polishing Machine should be polished shape of complex parts, or for small pieces of fine polishing.

2, suture: multi-purpose coarse cloth, non-woven fabrics and fine cloth made of suture can be used concentric spiral and direct radiation form, should be polished a variety of coatings and the shape of a simple work.

3, air-cooled cloth wheel: 45 degrees angle line method, Polishing Machine was ring-shaped fold-shaped, the middle with metal discs, with the characteristics of ventilation and cooling, should be polished large parts.

Polishing machine from the base, selling, polishing fabric, polishing cover and cover and other basic components.

The motor is fixed to the base, and the conical sleeve for the fixed disc is connected to the motor shaft by screws. The polished fabric is fastened to the polishing disc by the ferrule. Polishing Machine After the motor is turned on by the switch on the base, the pressure is applied to the sample by hand to polish the rotating polishing disc.

The polishing solution added during the polishing process can flow into the square plate placed next to the polishing machine through the drain pipe in the plastic tray fixed to the base.

Drums and covers prevent dust and other debris from falling on the polished fabric when the machine is not in use.

It is mainly to make up for the car surface after spraying, Polishing Machine there may be coarse particles, sand marks, flow marks, anti-white, orange peel and other film surface defects, the treatment method is to spray after polishing treatment to improve the paint Film mirror effect, Polishing Machine to achieve bright, smooth, bright requirements.